Maxxair 00-07500K MaxxFan Deluxe with Remote (Smoke)

The 00-07500K is Maxxair’s top-of-the-line 10-speed, reversible RV and van roof vent fan with a built-in rain cover, thermostat, and wireless remote. It combines a vent, fan, and rain shield in one unit to deliver powerful airflow and all-weather operation.

It fits the standard 14" × 14" roof cutout used on most RVs and camper vans. The system accommodates roof thicknesses from about 1 1/8" to 6 1/2" using the included interior garnish ring.

Yes. The integrated, full-time rain cover lets you operate the fan during rain and even when the vehicle is in motion, protecting your interior while maintaining ventilation.

The 00-07500K features a 10-speed reversible fan for both intake and exhaust, plus a built-in thermostat for automatic temperature control. You can run it manually from the keypad or with the included remote.

Airflow is roughly 900–920 CFM on high. Typical current draw ranges from about 1 amp on low up to approximately 4–5 amps at 12 VDC on the highest speeds. This balance gives strong ventilation with efficient power use for off-grid systems.

Provide a dedicated 12 VDC circuit capable of at least 5 amps and protect it with an appropriately rated fuse. Always follow the installation manual and your vehicle’s electrical guidelines.

No. Instead of a rain sensor, the MaxxFan Deluxe relies on its built-in, always-on rain cover so you can keep ventilating during wet weather without auto-closing.

You get the MaxxFan Deluxe assembly with smoke lid, interior insect screen, interior garnish ring, roof receiving flange, mounting hardware, and a wireless remote with a wall-mount cradle. Two AAA batteries are typically included for the remote.

Yes. Close the lid while the fan is running to enable “Ceiling Fan Mode.” This recirculates interior air without exchanging it with outside air, which is useful in cold or dusty conditions.

The insect screen removes easily by turning the four retainer knobs; no tools required. Clean with mild soap and water only. Do not operate the fan with the screen removed and avoid solvent-based cleaners on plastic parts.

Yes. The remote lets you set Auto Mode, where the fan opens the lid and adjusts speed to maintain your selected temperature. If 12 V power is removed, the thermostat defaults to approximately 78°F when power returns.

Install in a spot with at least 8" of clear space to the rear of the flange so the rear-facing intake/exhaust louvers are unobstructed. Keep nearby accessories far enough away to allow the lid to open fully and air to flow freely. For use with our roof racks request a CAD-verified layout.

MaxxFan Deluxe products carry a 2-year limited warranty, and the vent lid itself has a lifetime limited warranty. Keep your proof of purchase for any warranty claims.

The 7500K ships with a handheld remote.

Use only compatible roof sealants, center the roof flange in the 14" × 14" opening, and secure the unit with the provided stainless screws. Confirm the circuit rating, wire gauge, and polarity before powering the fan.