Icotek 10-Port Waterproof Cable Entry Housing Kit | KEL-FG-ER-A10

Regular price $139.95 USD
Regular price $149.95 USD Sale price $139.95 USD
SAVE 6% SOLD OUT

Configure your A10 cable entry kit

Includes 10 inserts. Every position starts with a BTK blank to seal an unused opening. Change each position that needs a cable. Measure the cable's outside diameter, including its jacket. Select by the cable diameter range, not wire gauge.

Overview

The icotek KEL-FG-ER-A10 10-Port Cable Entry Housing Kit organizes up to ten compatible cables through one panel opening. Its two-row layout provides additional capacity for solar, lighting, and accessory wiring in camper vans, RVs, and electrical enclosures.

The 90-degree housing directs cables along the mounting surface. Its split construction accommodates compatible pre-terminated cables without requiring their connectors to be removed.

Orion Van Gear includes ten customer-selected grommets or blank inserts with every kit. Mix sizes to suit your cables, repeat the same size, or use blanks to close unused positions.

Key Features

  • Ten configurable positions: Two rows of five small KT grommets.
  • Complete Orion kit: Includes the housing and ten selected grommets or blank inserts.
  • 90-degree cable routing: Directs cables along the mounting surface.
  • Split construction: Accommodates compatible cables with pre-installed connectors.
  • V2A stainless steel housing screws: Supplied housing part number 42340.200.
  • Protection up to IP65: When correctly configured, assembled, and installed according to manufacturer instructions.
  • Serviceable design: Open the housing to access or change inserts as your setup evolves.

Choose Your Ten Grommets

Use the configurator above the Add to Cart button to select each position. Every position starts with a BTK blank insert. Change each position that needs a cable. Measure your cable's outside diameter, including its insulation or jacket. Wire gauge and connector size alone do not determine the correct grommet.

Option Cable Diameter Part Number
BTK Blank Seals an unused position 41251
KT 4 4–5 mm 41204
KT 5 5–6 mm 41205
KT 6 6–7 mm 41206
KT 7 7–8 mm 41207
KT 8 8–9 mm 41208
KT 9 9–10 mm 41209

Ten inserts total are included per kit. Repeated sizes are welcome. Your selected sizes and part numbers are saved with your order.

Important Info: Cable Sizing

Cable diameters vary by manufacturer, model, and harness version. Measure each cable before selecting. Contact us before ordering if you need a diameter outside the available ranges.

What's Included

  • 1 × black icotek KEL-FG-ER-A10 housing with V2A stainless steel housing screws, part 42340.200
  • 10 × customer-selected gray KT grommets and/or BTK blank inserts
  • 1 × manufacturer-supplied flat rubber mounting gasket

Cables and accessories shown in application images are not included. Hardware for attaching the housing to your mounting surface is not listed as included.

Installation Considerations

Confirm the panel opening, mounting-hole locations, available clearance, and cable routing against the manufacturer's A10 drawing before cutting or drilling. Do not use the E5 drilling template.

For vehicle installations, verify mounting-surface suitability, roof curvature, gasket contact, and sealing requirements. Follow the manufacturer's assembly instructions and close every unused position with a compatible blank insert.


Frequently Asked Questions

1. Can I mix different grommet sizes?

Yes. Choose any combination of the available grommets and blanks, totaling ten inserts. You can repeat sizes or select different sizes for each position.

2. Do I need to use all ten cable positions?

No. Use BTK blank inserts in positions that do not need a cable. Blanks count toward the ten included inserts.

3. Is this suitable for solar and lighting cables?

It can accommodate compatible solar, lighting, and accessory cables within the selected grommet ranges. Measure the outside diameter of each cable and verify installation suitability before ordering.

4. Is the housing waterproof?

The housing system provides protection up to IP65 when correctly configured and installed. IP65 does not mean submersible. Correct grommet sizing, assembly, and mounting are essential.

5. How does the A10 differ from the E5?

The A10 provides ten small grommet positions in two rows of five. The E5 provides five positions in one row. The housings require different installation clearances and panel cutouts.

Get a CAD-Verified Roof Layout

We understand that every van setup is unique. That's why we offer CAD-verified roof layouts for customers who have purchased or plan to purchase an Orion roof rack - so you can maximize space and fit exactly what you need, where you need it. Request a layout here ›

Shipping & Returns

We offer free shipping to the lower 48 states on all products. Orders shipping to Alaska, Hawaii, Canada, or international destinations may have additional shipping charges calculated at checkout or quoted separately. Local pickup is also available at our McMinnville, Oregon warehouse by appointment.

Most purchases can be returned within 30 days of purchase if they are in new, resalable condition with original packaging. A 20% restocking fee applies; return shipping is the customer’s responsibility, and some items are final sale or not eligible for return. For full details, please see our Shipping Policy and Return Policy.

View full details

Recently viewed products

Your recently viewed is empty

Continue shopping