🍪 We use cookies to ensure you get the best experience on our website.
Have an account?
Log in to check out faster.
Shop Orion Van Gear best sellers, trusted by van builders and van...
Loading...
BLACK NOVEMBER SALE! DEALS ADDED DAILY.
116 Products
121 Products
118 Products
79 Products
5 Products
3 Products
6 Products
8 Products
70 Products
14 Products
18 Products
12 Products
9 Products
13 Products
19 Products
170 Products
15 Products
69 Products
Includes 5 inserts. Every position starts with a BTK blank to seal an unused opening. Change each position that needs a cable. Measure the cable's outside diameter, including its jacket. Select by the cable diameter range, not wire gauge.
Front schematic view, not to scale. Positions run left to right. Labels show cable diameter ranges.
Choose inserts using the lists above. Your selections will be included with your order.
The icotek KEL-FG-ER-E5 5-Port Cable Entry Housing Kit provides a clean, organized, and water-resistant solution for routing electrical cables through a single opening. Ideal for custom camper vans, RVs, overland vehicles, and electrical enclosures, this compact housing allows up to five cables to pass through a wall or panel while maintaining protection up to IP65.
Unlike traditional cable glands that require individual holes for each wire, the KEL-FG-ER-E5 uses a single rectangular cutout and five interchangeable cable grommets. Its 90-degree design helps direct cables along the mounting surface rather than straight outward, making it especially useful for installations where space and cable management are important. The split housing and grommet design also accommodates cables with factory-installed connectors, eliminating the need to cut and reconnect wiring during installation.
Orion Van Gear includes five customizable cable grommets with every kit. Choose the appropriate sizes for your cables or use blank inserts to seal unused positions. Each kit is configured to match your installation requirements.
Every Orion Van Gear E5 kit includes five grommet positions configured for your installation. Each position can use a different cable diameter, making it easy to route solar wiring, electrical accessories, and other compatible cables through one housing.
Measure the outside diameter of each cable, including its insulation or outer jacket, to determine the appropriate grommet size. Cable gauge alone does not determine grommet compatibility.
Grommets are interchangeable, and unused openings can be filled with BTK blank inserts. The kit includes five inserts total, in any available combination needed for your installation.
Grommet sizes must be confirmed before your kit ships. Select the appropriate sizes using the product configurator when available. If the configurator is not yet displayed, Orion Van Gear will contact you after ordering to confirm your cable diameters. Please contact us before purchasing if you need a size outside the listed options.
Note: Mounting hardware for securing the housing to your vehicle or panel is not confirmed as included. The five included grommets are separate from the housing's manufacturer packaging quantity.
The KEL-FG-ER-E5 is designed for installation through a compatible wall, panel, or enclosure using a rectangular opening measuring 112 x 24 mm.
Before cutting or drilling, verify the mounting surface, available clearance, fastener locations, and cable routing. For vehicle installations, pay particular attention to roof curvature, panel thickness, water drainage, and the manufacturer's sealing requirements.
For the best sealing performance, use the correct grommet for each cable diameter and ensure all unused positions are properly closed with compatible blank inserts. Follow the manufacturer's assembly instructions and verify compatibility with any additional sealants or mounting hardware.
Yes. Unlike purchasing the housing separately, Orion Van Gear's complete kit includes five customer-selected small KT cable grommets or BTK blank inserts. You can select different sizes for each of the five positions.
Measure the outside diameter of each cable, including its insulation or outer jacket, in millimeters. Match that measurement to the appropriate KT grommet range. The initial Orion Van Gear assortment includes sizes for cables measuring 4-10 mm in diameter, plus blank inserts for unused openings. If you are unsure, contact us with your cable measurements before purchasing.
The icotek KEL-FG-ER-E5 is rated up to IP65 when properly assembled and installed. This provides dust-tight protection and resistance to water jets, but does not mean the housing is rated for submersion. Proper mounting, gasket installation, and cable grommet selection are essential for maintaining the specified protection rating.
The E5 can be considered for routing compatible solar and electrical cables through a panel or enclosure, including custom van installations. However, vehicle-specific suitability depends on the mounting surface, cutout location, cable diameters, available clearance, and sealing requirements. Confirm those details before installation.
Yes. One of the primary benefits of the icotek split cable entry system is its ability to accommodate pre-terminated cables. The split grommets fit around the cable jacket, allowing the housing to be assembled without cutting off or removing compatible factory-installed connectors.
No. You can use any number of the five positions. Unused positions should be filled with the appropriate BTK blank grommets to maintain the integrity of the cable entry assembly. Blank inserts count toward the five included grommet positions.
Yes. The split housing and removable KT grommets allow the assembly to be opened for cable changes or maintenance. The housing must be correctly reassembled afterward to maintain its sealing and strain relief performance.
The E5 is a compact, single-row housing with five small KT grommet positions and a 112 x 24 mm cutout. The A10 provides ten small KT grommet positions in a larger, two-row housing and requires a 112 x 36 mm cutout. Both use 90-degree cable entry designs and provide protection up to IP65 when properly assembled and installed.
We understand that every van setup is unique. That's why we offer CAD-verified roof layouts for customers who have purchased or plan to purchase an Orion roof rack - so you can maximize space and fit exactly what you need, where you need it. Request a layout here ›
We offer free shipping to the lower 48 states on all products. Orders shipping to Alaska, Hawaii, Canada, or international destinations may have additional shipping charges calculated at checkout or quoted separately. Local pickup is also available at our McMinnville, Oregon warehouse by appointment.
Most purchases can be returned within 30 days of purchase if they are in new, resalable condition with original packaging. A 20% restocking fee applies; return shipping is the customer’s responsibility, and some items are final sale or not eligible for return. For full details, please see our Shipping Policy and Return Policy.
Replaces the Dometic Midi that came with our Northern Lite at a third of the cost. Very satisfied with the design, manufacture and ease of use. Install was a breeze although a little sticky getting the old unit out. Had to open up the original hatch opening a smidgen for it to fit. Again overall very satisfied with the NomadicArk would buy again but I don't think you would have to. Best part was it Shipped within 2 days of order..
The customer service is over the top. Responses are almost immediate. They designed a Dragonfly tarp for our truck camper, made recommendations on the size, pole choice, and it turned out perfectly. I just set the awning up and it is perfect. Fantastic coverage with a lot of options. This company will be my first choice for any gear going forward.
Great product. Used daily in my build— ac fan solar….
Kaiya provided wonderful support for a troublesome panel struggling during a second year of operation -- I could not be more pleased to have chosen Orion for my solar! The Stealth rack & awning are quite sweet as well :). Thanks Orion!